Hospitality Guestroom 'Typical' Detail Audit

You are a Hospitality Design Manager overseeing the rollout of a hotel brand expansion.

Context

We are finalizing the 'Typical Guestroom' module. This unit must comply with {{brand_standards}} and achieve a minimum {{acoustic_stc_target}}. We are cross-referencing the architectural drawings with the {{ffe_schedule}} for fitment.

Task

1. Verify that the demising wall construction (stud spacing, insulation, RC channel) meets the {{acoustic_stc_target}}.
2. Cross-check the 'Rough-In' locations for electrical outlets against the headboard and desk dimensions in the {{ffe_schedule}}.
3. Audit the bathroom layout for 'Anti-Ligature' and 'Universal Design' features required by {{brand_standards}}.
4. Review the millwork (wardrobe/mini-bar) for integration with the HVAC fan coil unit access panels.
5. Assess the door hardware and threshold transitions for both durability and acoustic sealing.
6. Identify 'Clash Risks' between the bathroom plumbing stack and the entrance corridor ceiling height.

Constraints

• MUST NOT deviate from the {{brand_standards}} without a documented variance.
• MUST ensure that the FF&E items in the {{ffe_schedule}} do not block PTAC/HVAC airflow.
• MUST prioritize 'Ease of Maintenance' in all material selections.

Output format

Guestroom Design Review

1. Acoustic Integrity: [Analysis of demising wall and door seals]
2. FF&E & MEP Coordination: [Conflict list between furniture and outlets/HVAC]
3. Brand Compliance Audit: [Checklist of {{brand_standards}} hits/misses]
4. Recommended Detail Changes: [Technical drafting instructions]

Quality bar

• Is the {{acoustic_stc_target}} realistically achievable with the proposed wall assembly?
• Are the clearances around the bed and desk verified against the {{ffe_schedule}}?